Lites and Louvers in Prime Coat

• For 3/16″, 1/4″, and 1″ thick glass frames
• For use in Fire-Rated door applications under positive and neutral pressure.
• Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.

Divided Reverse “Y” Blade, Inverted Louvers / Inverted Y-Blade Louvers

• 90 Minute Fire Rated Steel Louvers
• For use in fire-rated door applications under positive and neutral pressure Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), NFPA 252 (2012), CSI CODE 08 90 00 Louvers and Vents.

Adjustable Fusible Link Louvers

• Recommended for use in rooms where ventilation is needed and at the same time isolating the room whenever fire is present.
• When louver is exposed to heat at 165°F, the fusible link trips and the spring loaded louver blades shut to form an air tight fire and smoke seal.
• WHI Listing Mark with a 60-90 Minutes Fire Rating is stamped on the frame of the louvers.
• Installation is easy.
• No need to drill holes for fasteners.
• All screws are mounted on the room side leaving the corridor side free of fasteners for security purposes.
• Fuses are replaceable.

Vision Lite Low/Standard Profile Kit

• Vision Lite Frame
• Glass types are Non-Fire Rated Tempered (¼”), Fire Rated PROTECT3™ Wired Safety (¼”) and Pyran® Platinum F Glass (3/16”)
• Glazing Tape Combination
• For use in fire rated door applications under positive and neutral pressure.
• Intertek testing certification in compliance to NFPA 252 (2000), UL 10C (2009), CAN/ULS104 (2010), NFPA (201) and CSI CODE 0870 00.